Breaking

The RP2040 is Now Available for $1

Raspberry Silicon RP2040 on sale now at $1

Raspberry Pi Pico was released in January of this year. This was a first for everyone: the Raspberry Pi's first microcontroller-class board, and the first to be based on the RP2040, a microprocessor created. Simultaneously, Raspberry Pi unveiled RP2040-based devices from a many companies Check Now.

The RP2040 is Now Available for $1
The RP2040 is Now Available for $1

Raspberry Pi revealed the natural next step today, June 1st, 2021: RP2040 chips are now available in single-unit numbers, letting you to construct your own projects and products on Raspberry Silicon.

RP2040 Microcontroller

Based on years of utilising other manufacturers' devices in our own products and projects, the RP2040 is our vision of the ideal mid-range microcontroller. It distinguishes itself in three ways:

  • Two quick CPU cores. A pair of ARM Cortex-M0+ cores running at 133 MHz give sufficient integer performance. Use one core to execute application code and the other to oversee hardware, or use FreeRTOS or MicroPython to execute application code on both cores.
  • There is plenty of RAM. With 264KB of RAM, you may focus on creating features rather than reducing the size of your programme. A fully linked switch connects ARM cores and DMA engines to six distinct RAM banks, allowing you to extract every last bit of performance from the system. 
  • I/O flexibility. All of the standard interfaces are available, including hardware UARTs, SPI and I2C controllers, USB 1.1, and a four-channel ADC. However, it is the programmable I/O (PIO) subsystem that distinguishes the RP2040, allowing software implementations of protocols like as SDIO, DPI, I2S, and even DVI-D.
    RP2040 Datasheet

All of this is crammed into a 77 mm QFN56 package made of 2 mm2 of 40 nm silicon.

RP2040 the microcontroller, perfected
RP2040 the microcontroller

Most recently adding FreeRTOS support. And hundreds of people were waiting for RP2040, 

The RP2040 costs $1 per unit, so you get a lot of bang for your (actual) buck.

So go to the product page and place your first order.

The lifeblood of the Raspberry Pi and maker communities is the first and third component accessories. They provide new features and make it easier to complete projects.

SB Components, a UK-based official Raspberry Pi Reseller, was the first to market. They have launched 17 new Pico accessories, ranging from basic breakout boards that allow several addons to be utilised for DIY projects to exploring the potential of the Raspberry Pi Pico, and a Pico LoRa™ Expansion board, which comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S SMA antenna connector that covers 868MHz & 433MHz frequency band. We have shared the products below:

  1. Pico LoRa Expansion 868MHz : Pico LoRa™ Expansion is a low-power consumption data transmission board that includes an onboard CH340 USB TO UART converter, a Voltage Level Translator (74HC125V), an E22-900T22S SMA antenna connector that covers the 868MHz frequency band, an onboard 1.14" LCD, an IPEX antenna connector, and LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating. Pico LoRa™ Expansion is developed to enable data transmission up to 5 KM through serial port. Pico LoRa™ Expansion was created to allow data transfer up to 5 kilometres through serial interface. 433MHz LoRa Expansion for Pico also Available. 
  2. 1.28” Round LCD HAT for Pico1.28-inch display HAT with 240 x 240 resolution, 65K RGB colours, crisp and colourful display effect, and joystick, developed for the Raspberry Pi Pico to broaden its engagement through SPI connection by offering a standard 40 pin Pico GPIO interface.
  3. 1.14” LCD HAT For Pico : 1.14-inch display expansion board module with a joystick and a resolution of 240135, 65K RGB colours, clean and colourful presenting effect, created specifically for Raspberry Pi Pico to increase its involvement through SPI connection by offering a standard 40 pin GPIO interface. 
  4. Pico Motor Driver HAT : DC motor control module supplied by one H-bridge IC L293D with a motor input supply voltage range of 6 V to 12 V. It is intended to link two DC motors at the same time or one stepper motor, allowing the user to create projects with a small footprint and great efficiency. 
  5. Pico RTC (Real Time Clock) HAT : Real-Time clock extension module with the powerful IC DS3231, backup battery holder, 3.3 V working voltage, and Fast (400kHz) I2C Interface that detects time and aligns the device's time with the "Real-Time". 
  6. Pico RFID Expansion : RFID Reader with a 125KHz frequency and a small design that includes a programmable 0.91” Oled screen and an improved UART/I2C interface that is compatible with the Raspberry Pi Pico Board
  7. Pico Dual Channel Relay HAT : Relay HAT is a two-channel high-quality relay with loads up to 250V AC/ 7 A, 30V DC/ 10A to control high voltage/current devices. 
  8. Pico Single Channel Relay HAT : It can handle loads of up to 250V AC/ 7A and 30V DC/ 10A, allowing you to manage high voltage/current devices. It has a Female Pin Header for easy connection to the Raspberry Pi Pico through stacking. 
  9. Pico 3V Relay HAT : High-quality two-channel relay with a switching voltage (VAC) of up to 2A/120V (Max), a switching voltage (VDC) of up to 2A/24V (Max), and an operating voltage of 3.3V. 
  10. Pico 2 Channel Expander : Pico 2 CH Expander is intended specifically for use as a GPIO extender, having 2 sets of 2 x 20 pin headers for connecting to HATs or Breadboards.
  11. Pico 4 Channel Expander : Pico 4 Channel Expander is intended to function as a GPIO extender by offering 4 sets of two 20-pin headers for use with HATs or breadboards. 
  12. Pico HAT Expansion : HAT Expansion is a Raspberry Pi Pico input/output expansion board that includes one set of 2x20 pin headers in the form of a Raspberry Pi Header and one set of 2 x 20 pin. This implies that any HAT developed for the Raspberry Pi Board can be plugged in. 
  13. Pico GPIO Expansion Board : Pico GPIO Expansion Board with 3.3 V output voltage. Pico GPIO Expansion Board is designed to split off all of the Raspberry Pi Pico development board's pins and power in two ways (male or female header). It enables the user to connect it to other components via a jumper wire. 
  14. Pico Breadboard Kit : A multi-purpose Kit with a "400 points half-size breadboard" on top, a Programmable Buzzer, 4 Programmable LEDs, 4 Push buttons, and dedicated 5V, 3v3, and GND pins all in one spot. It contains sophisticated features like as individually controlled LEDs, switches, and a 400-point half-size breadboard that allows users to efficiently prototype their ideas using the Raspberry Pi Pico. 
  15. Pico Relay Board : Up to four appliances and loads of up to 250V AC at 7A and 30V DC at 10A can be controlled. It allows users to control high-voltage/high-current devices. It has a “Optocoupler,” which enables the circuit to convey an electrical signal between two separated circuits using light energy.
  16. Pico Zero Board : Pico Zero Board is a useful and well-labelled board with a 6x20 grid of 2.54mm spacing mounting holes that allows users to quickly solder the Pico pins. With properly connecting bespoke circuits, the Pico Zero Board provides a secure, compact, and long-term safe housing for your breadboard project!
  17. Pico Zero Expansion : cleanly labelled expansion, with a 6x20 grid in the centre for the Raspberry Pi Pico and an 8x20 grid on both sides to connect peripherals, 2.54mm spacing mounting holes suited for users to simply solder the Pico pins

Recommended Article:

Popular Posts